Phone/Fax: (812) 493-50-48

En
Download catalogue
Download the presentation PDF 2.11 MB. The presentation tells about the history, production capabilities and unique developments.

Filters

Flanged

in-line sea-water filters of screen type

in-line sea-water filters of screen type

FUNCTION AND TECHNICAL DATA: Pressure: 2, 4, 6, 40 kg-f/cm²;
The conducting medium: sea water;
Degree of filtration, mm: 0,3; 2,5; 4,5 mm;
The material: Cu-Ni alloy, bronze;
Note: Flanges under State standard 1536-76;
in-line fresh-water filters

in-line fresh-water filters

Pressure: 6 kg-f/cm²;
Degree of filtration: 2,5 mm for fresh water;
The temperature of the conducting medium: from -2 up to +50°С;
Max.permissible pressure drop: 0,05 (0,5) MPa (kg-f/cm²);
Flanges:: under State standard 1536-76;
in-line oil and fuel filters

in-line oil and fuel filters

Pressure: 6 kg-f/cm²;
The conducting medium: oil, fuel, fresh water;
Degree of filtration: 1 mm for oil and fuel;
The material: carbon steel, stainless steel;
Flanges: under State standard 1536-76;
aperture oil and fuel filters

aperture oil and fuel filters

FUNCTION AND TECHNICAL DATA: The filter is intended to clean oil and fuel from mechanical impurities in systems of marine power stations.;
Degree of filtration, mm: 0,25; 0,4;
Capacity, t/h: 12;
Possible to equip with the servodrive for the automatic cleaning, as well as solenoid vent valve: Possible to equip with the steam heating for the high-viscosity liquid pumping;
hydraulic screen filters, one cartridge type

hydraulic screen filters, one cartridge type

FUNCTION AND TECHNICAL DATA: The filter is intended for the primary purification of salt water from mechanical impurities in marine pipelines.;
Installation position: vertical, with covers being on top;
Degree of filtration, mm: 2,5;
Max.permissible pressure drop, kg-f/cm²: 0,8;
angular filters with nonwoven filter element

angular filters with nonwoven filter element

FUNCTION AND TECHNICAL DATA: Filters are intended to be installed in ships and vessels for the fine purification of diesel fuel GOST 4749-49 and 305-62 from mechanical impurities.;
The impact-resistance: under current norms of the ship equipment resistance. ;
The vibration-resistance: under current norms of the ship equipment vibration-resistance.;
duplex filters with the switching unit of cork type

duplex filters with the switching unit of cork type

FUNCTION AND TECHNICAL DATA: The filter is intended to be installed in marine systems as a unit to clean oil and fuel from mechanical impurities. ;
Capacity, m³/h: 9,0;
Degree of filtration, mm: 0,5;
The temperature of the conducting medium, °C: +60;

Nipple

screen filters, one cartridge type

screen filters, one cartridge type

FUNCTION AND TECHNICAL DATA: Filters are intended to be installed in marine systems as a unit to clean oil and fuel from mechanical impurities. ;
screen one-fold filters

screen one-fold filters

FUNCTION AND TECHNICAL DATA: The filter is intended to be installed in marine oil and fuel systems as a filtering element.;
Degree of filtration, mm: 0,25;
slotted oil and fuel filters

slotted oil and fuel filters

FUNCTION AND TECHNICAL DATA: The filter is intended to clean oil and fuel from mechanical impurities in systems of marine power stations.;
Degree of filtration, mm: 0,25;
Capacity, t/h: 8;
Max.working temperature, °C: 70;
duplex slotted filters with the switching unit of cork type

duplex slotted filters with the switching unit of cork type

FUNCTION AND TECHNICAL DATA: The filter is intended to clean fuel from mechanical impurities. ;
The conducting medium: fuel, oil under temperature up to 90°C;

Other

portable oil and fuel filters

portable oil and fuel filters

FUNCTION AND TECHNICAL DATA: Filters are intended to clean oil and fuel from mechanical impurities when being operated at the premises.;
Type: aperture, wire ;
The setting position: vertical, with the air valve being in the top position. ;
Nominal degree of filtration, mm: 1,7;
Max.working temperature, °C: from 271 up to 343 (from -2 up to +70);
Max.permissible pressure drop, MPa (kg-f/cm²): 0,15(1,5);
screen in-line water, oil and fuel filters with the hose coupling

screen in-line water, oil and fuel filters with the hose coupling

FUNCTION AND TECHNICAL DATA: The filter is intended to be installed as a filtering unit in oil and fuel hull systems.;
The setting position: vertical, with the cover being in the top position.;
Degree of filtration, mm: 2,5;
duplex slotted -disk filters

duplex slotted -disk filters

FUNCTION AND TECHNICAL DATA: The filter is intended to be installed in hull systems as a unit to clean feed water and distillate from mechanical impurities. ;
The setting position of covers: top, bottom ans sideways.;
The filter fastening: both rigid and amortized fastening are acceptable.;
ion-exchange filters

ion-exchange filters

FUNCTION AND TECHNICAL DATA: The filter is intended for the deep chemical purification of water in marine systems.;
Max.temperature of the water to be filtered, °C: 70;

light-oil filter

FUNCTION AND TECHNICAL DATA: The purification of diesel fuel cut from water and mechanical impurities (cut up to 350°);
The medium to be purified: The component to prepare diesel fuel under GOST 305-82.;
Density, kg/m³ under 20/50°С: 870/850;
Viscosity, cSt unedr 50°C: 13,56;
Productivity, nominal/max.,m³/h: 20/35;
Working/design pressure, MPa: 1,0/1,0;
Overall dimensions, mm: 1500x1500x3000;
аutomatic fuel filter

аutomatic fuel filter

FUNCTION AND TECHNICAL DATA: • two-phase cleaning: the medium enters the primary purification chamber (slotted filter). Then the medium is directed to the fine purification chamber (degree of filtration – 25 micron). ;
• there is a hot standby system. Shall the maximum pressure drop be achieved in any chamber, the dirty line is locked and the flow is directed to the filter standby line. : • each chamber is equipped with the automatic cleaning system.;
• the fine filtration chamber is equipped with the reverse flow cleaning system as well as with the steam blowing function. : ;
oily bilge water treatment system

oily bilge water treatment system

FUNCTION AND TECHNICAL DATA: • two-phase purification. At the 1st stage, the oily bilge water is sucked into the vacuum chamber, where phase separation takes place. Then water enters the filter chamber and is purified from the residual mechanical impurities.;
• The oil content in discharge water is constantly controlled by the automatic equipment with the help of the signaling indicator. Shall the contamination level be unacceptable, the flow is directed to the repeated purification.: • The vacuum chamber is equipped with the function of the hot water flushing to fully regenerate functionality of the filter element without the necessity to open the vacuum chamber.;
oil and fuel filters with polymeric  filter cartridges

oil and fuel filters with polymeric filter cartridges

Medium: oil, diesel fuel;
Working pressure, kg-f/cm²: 10;
Degree of filtration. mcm: 15;
Material: stainless steel;
Function: fine purification of oil and diesel fuel from free and part of water contaminant, mechanical impurities and biofouling. The filtering base consists of 21 polymeric renewable cartridge ;
Feedback

All fields are required